DDR memory sticks
DDR RAM is used by your computer to transfer data between the processor and hard drive. If you want to get increased performance out of your computer without buying additional memory, you can try to overclock your RAM. Overclocking is the process of making your memory run faster by tweaking the settings on your computer.
Instructions
1. Restart your computer. As the logo of your computer's manufacturer appears on the screen, follow the onscreen prompt to enter the computer's BIOS setup. On most computers, you'll press the F2 or Delete key.
2. Navigate to the section for advanced settings with your arrow keys. Scroll to the front-side bus screen, which will be labeled something like "FSB & Memory Config."
3. Highlight the entry for changing the front-side bus memory mode, which may be labeled "FSB Memory Clock Mode" or similar. Check to see if it is labeled "Linked" or something similar. Press the Enter key to change the setting to "Unlinked."
4. Highlight the option to change the DDR RAM's speed. On many computers, the option is labeled "FSB DDR Mhz." Check to see what number is listed--such as 533 or 800.
5. Press Enter and then type in a higher increment. Although you can enter any number, its easier to use standard increments memory uses before being overclocked. Type in a number such as 1066 if the previous increment was 800--1066 is the next increment for a higher-rated memory stick. Save the changes to increase the RAM speed. Leave the BIOS and boot to your operating system.
6. Open a memory-intensive application such as a computer game. Run the application for 15 or 20 minutes to see if the program becomes unstable or if the computer crashes.
7. Return to the BIOS menu if the computer does not run properly. Try lowering the FSB setting in increments of 10 or 20 until you reach a point where you get better performance without suffering computer crashes.
Tags: your computer, computer crashes, Press Enter