The PlayStation 3 shares a common problem with other next-generation game consoles: a power surge in the electrical line can cause a fuse to blow out. This fuse prevents the PS3 from working altogether, and it can cost a hefty amount to replace it at a service center. Repairing the PS3 by replacing the fuse on your own will save you money, but it is not a casual repair. It should only be done if you have a basic understanding of electronic components and are comfortable taking apart electronic devices.
Instructions
1. Lay newspaper down on a table. Remove the power cord and all other cords from the PS3. Put the PS3 face up on the newspaper. Use the flat edged screwdriver to remove the two rubber feet at the left side of the console. Remove the screws that are under the rubber feet using the Phillips screwdriver. Remove the outer shell of the PS3 by sliding it off to the right and place it aside.
2. Use the Torx screwdriver to remove the seven screws now exposed on the PS3's case. Release the two clips at the back of the PS3 with the flat edged screwdriver. Raise the case up and toward the back. Remove the USB connectors if the PS3 is a first generation model. Put the case aside.
3. Unscrew the power supply from the motherboard using the jeweler's screwdriver. Lift up the power supply and remove the power plug from the motherboard by squeezing the plug on both sides and pulling it straight up. Place the power supply down on the newspaper.
4. Remove the fuse from the power supply by twisting it back and forth and then pulling it out using the needle nosed pliers. Clean out the space where the fuse was and around the motherboard in the PS3 with compressed air.
5. Insert a replacement fuse into the power supply. Insert the power plug into the socket on the motherboard, and then place the power supply back into position on the motherboard and screw it back on.
6. Reassemble the PS3.
Tags: power supply, edged screwdriver, flat edged, flat edged screwdriver, from motherboard, power plug