A wooden PC case can make a fashionable compartment for your PC. Use wood and stain that match the rest of your furniture so the case complements the decor of your room. A wooden PC case is inexpensive and simple to create.
Instructions
1. Measure your PC from top to bottom, front to back and side to side. Add a 1/2 inch to each measurement. This allows room for the wooden case to fit over your PC.
2. Cut out the plywood to match the measurements from Step 1. You'll need a top, bottom and 2 sides. The front is left open for the computer. Miter cut the edges of the plywood so they form a 90-degree angle when they meet.
3. Create the wooden case for the PC. Screw the 2-sided piece to opposing sides of the bottom piece of plywood. Attach the top. Secure 2 screws per board, one in each corner, so that the screws drill in at an angle and penetrate both boards.
4. Stain the case. Apply at least 2 coats of stain to the plywood. Allow each coat of stain to dry before applying another coat.
5. Slide the PC into the case. Plug in the cords and cables.
Tags: wooden case, room wooden, room wooden case