Motherboards are the heart of a computer.
A computer motherboard is the heart of any computer system. The motherboard is what connects everything together. The motherboard is one part and does not need to be assembled but the other parts of the computer must be assembled onto the motherboard. Motherboards can have a large variety of different connections type, so using the motherboard manual will be required if you are unfamiliar with or have trouble with a specific connection.
Instructions
1. Screw the motherboard holders onto the matching holes on the computer case. Set the motherboard on top of the small metal holders. Screw the motherboard onto the holders through the matching holes in the motherboard.
2. Lift the processor bar and insert the processor in the matching square with the pins or pin holes that line up with the processor. There should be one corner on the chip and the motherboard area that is missing a pin and hole so that you know place the chip.
3. Push the RAM straight down into the memory slots until it clicks and the tabs pop out on each side of the slots.
4. Connect a hard drive cable from the hard drive connector on the motherboard to the hard drive. Push any cards, such as video or sound cards, into the card slots on the back of the motherboard and screw the cards onto the case.
Tags: hard drive, heart computer, matching holes, Screw motherboard