Though PCIe has become the new standard for graphics cards there are still many users utilizing motherboards with AGP graphics interfaces only. The Nvidia 7300 GT is a graphics solution that performs well and fits the AGP interface. Installing a 7300 GT is a simple process which any user can accomplish in just a few minutes to enable high speed graphics capabilities on their computer.
Instructions
1. Disconnect your computer from any electrical sources.
2. Remove your computer case's side access panel. This may require removing two thumbscrews from the rear face of the computer case.
3. Locate your AGP interface. This should be the top most card slot on the bottom left portion of the motherboard.
4. Insert the 7300 GT into the AGP port ensuring a snug fit without applying too much pressure.
5. Connect a free four-pin "Molex" power connector from your computer's power supply to the side auxiliary power connector on the edge of the card opposite the side nearest the case's rear face.
6. Replace the computer's side access panel and reestablish any electrical sources severed earlier.
7. Boot into your operating system and install any necessary driver software to ensure proper functionality.
Tags: your computer, access panel, computer case, electrical sources, power connector, rear face