Resetting the company name in the BIOS is relatively simple to perform.
The Basic Input/Output System (BIOS) is an operating system used by computers to establish and communicate with all of the computer's components. The BIOS allows higher-level operating systems to maintain a working connection to the computer's various parts. The BIOS also saves data such as system time and the owner of the computer, as well as a plethora of other information. Removing certain information, such as previous company names, can be done directly in the BIOS.
Instructions
1. Power down the computer. Wait approximately 10 seconds, and then power the computer back on. After the computer powers up, wait for the "Enter BIOS" message to pop up. This message will tell you the necessary key to press to enter BIOS. Press the key to allow the BIOS setup program to run.
2. Look for a BIOS tab named "System Information" or an equivalent. Search for entries related to computer naming or computer ID. Press "Enter" on the corresponding entry to attempt to edit the setting. Replace the name by keying in a new entry, or use the "Backspace" key to remove all characters from the entry to attempt to leave it blank.
3. Press the "Escape" key to close data. Ensure that the data is saved. The BIOS will typically ask if you'd like to "Save and Escape" or "Disregard Any Changes and Escape." Be sure to select "Save and Escape." Allow the computer to reset, and check to see if the company name is still displayed by the BIOS. Continue to the next step if the name is still displayed by BIOS.
4. Power down the computer. Remove the case panel screws with a screwdriver if the name is still present in the BIOS. Remove the panel by sliding it off the computer case. Look for the system battery using a flashlight. It is usually button-sized and located near the CPU fan. Gently pry the battery out of the motherboard retainer and wait approximately 30 seconds. Put the battery back into place and replace the case panel.
5. Power on the computer and wait for the BIOS to initialize. Ignore any warnings regarding a reset in data; this is due to removing the system battery. Check again for the company name being present.
Tags: company name, name still, approximately seconds, case panel, displayed BIOS