Put your Intel motherboard in its place.
Installing a new motherboard can be a daunting task. As the central hub of your computer, a proper installation of the motherboard is vital. For those who own an Intel 845G series board, installation is straightforward. You’ll have your computer up and running in no time, and rest assured your motherboard is safe and secure.
Instructions
1. Install the motherboard’s I/O shield into the case. This plate sets up your case to fit precisely with all the connections at the back of your motherboard. You might need to take out the default I/O plate present on your computer’s case already. Press firmly from the back of the plate, and it should snap out of place. Install the I/O shield included with your Intel motherboard by pressing it firmly into the slot from inside the case. The shield should snap into place.
2. Screw your motherboard onto your computer case. The board attaches to the case via eight clearly marked mounting holes scattered around the motherboard. Use screws to mount it to your computer’s chassis. Make sure risers are used (unless your case has risers built in) to ensure the motherboard does not make contact with the metal of the case, as this can cause a short circuit.
3. Install the processor heatsink base to the board. Insert the four white pins of the base into the corresponding holes located around the processor.
4. Install the processor. Raise the processor socket lever on the motherboard. Drop the processor into place ensuring the processor and the socket are properly aligned. Return the socket lever to its original position to lock the processor into place.
5. Install the processor’s heatsink. To do this, insert the four heatsink pins into the corresponding holes in the heatsink base. Press gently on each of the four pins to lock them in place with a click. Connect the heatsink’s power cord to the fan connector located to the left of the processor socket.
6. Connect all remaining PC parts. Refer to the hardware manuals to ascertain connect the parts to the motherboard.
7. Connect power to the motherboard. Take the 20-pin connector from your power supply and connect it to the appropriate socket on the left side of your motherboard.
Tags: your motherboard, into place, processor socket, your computer, corresponding holes